YOUR TASKS Implement quality methodologies and procedures at the buffer yards, ensuring strict adherence to the quality control plan Supervise the proper execution of various subprocesses at the buffer yards Inspect incoming components such as concrete tower segments and tower internals Conduct audits on the installation of tower internals within stored tower segments Perform final inspections of the concrete tower before handing over to the Project Management organization Identify, document, and manage non-conformities arising during storage at the buffer yards Report daily on the progress and quality status of construction activities Participate in cross-functional meetings within the concrete tower structure to support project execution Coordinate tasks and activities at the buffer yards with the global quality team YOUR PROFILE Completed vocational training in a technical field (e.g. construction materials testing, concrete technology, or similar); further qualification as a certified technician in civil engineering or quality management is an advantage Experience with concrete and/or quality procedures is an asset English proficiency at B2 level and strong communication skills German proficiency at C1 level Team-oriented mindset YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
YOUR TASKS Implement quality methodologies and procedures at the buffer yards, ensuring strict adherence to the quality control plan Supervise the proper execution of various subprocesses at the buffer yards Inspect incoming components such as concrete tower segments and tower internals Conduct audits on the installation of tower internals within stored tower segments Perform final inspections of the concrete tower before handing over to the Project Management organization Identify, document, and manage non-conformities arising during storage at the buffer yards Report daily on the progress and quality status of construction activities Participate in cross-functional meetings within the concrete tower structure to support project execution Coordinate tasks and activities at the buffer yards with the global quality team YOUR PROFILE Completed vocational training in a technical field (e.g. construction materials testing, concrete technology, or similar); further qualification as a certified technician in civil engineering or quality management is an advantage Experience with concrete and/or quality procedures is an asset English proficiency at B2 level and strong communication skills German proficiency at C1 level Team-oriented mindset YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
Performs testing of samples linked to operations, validation, utilities and environmental monitoring samplesCoordinate and work on the transfer, development and validation of analytical methods including qualification of equipment needed for analysisCoordination in maintenance, calibration and use of laboratory equipmentActively contribute to the GMP Inspection Readiness of QC to ensure the fully compliance of relevant Quality System and Procedural documentsActively contribute to the QC operational readiness managing projects (external and internal) and the assigned to ressources (including coordination of people daily tasks)Participates in the transfer, development and validation of analytical methods including qualification of equipment needed for analysisCreation and revision of guidance documents such as SOPs/ WIs and other related documents Master’s degree or higher in Life Sciences, Chemistry, Biochemistry, or a related scientific field (lower educational background acceptable with relevant experience)Solid experience in chemical or biochemical laboratories, including work in a regulated GMP environmentExperience performing analytical testing of samples related to operations, validation, utilities, and environmental monitoringStrong expertise in analytical method transfer, development, and validationExperience with qualification, maintenance, and calibration of analytical laboratory equipmentSolid understanding of GMP regulations, quality systems, and inspection readiness within QC laboratoriesExperience in creating and revising SOPs, work instructions, and other quality documentationAbility to coordinate QC activities and support operational readiness projects in laboratory environmentsStrong collaboration and communication skills, working effectively across cross functional teamsDemonstrated ability to drive results, adapt quickly to changing situations, and maintain a strong business and quality focus Renowned pharmaceutical company Attractive salary package HAYS Benefits Ihr Kontakt Referenznummer 864632/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Performs testing of samples linked to operations, validation, utilities and environmental monitoring samples Coordinate and work on the transfer, development and validation of analytical methods including qualification of equipment needed for analysis Coordination in maintenance, calibration and use of laboratory equipment Actively contribute to the GMP Inspection Readiness of QC to ensure the fully compliance of relevant Quality System and Procedural documents Actively contribute to the QC operational readiness managing projects (external and internal) and the assigned to ressources (including coordination of people daily tasks) Participates in the transfer, development and validation of analytical methods including qualification of equipment needed for analysis Creation and revision of guidance documents such as SOPs/ WIs and other related documents Master’s degree or higher in Life Sciences, Chemistry, Biochemistry, or a related scientific field (lower educational background acceptable with relevant experience) Solid experience in chemical or biochemical laboratories, including work in a regulated GMP environment Experience performing analytical testing of samples related to operations, validation, utilities, and environmental monitoring Strong expertise in analytical method transfer, development, and validation Experience with qualification, maintenance, and calibration of analytical laboratory equipment Solid understanding of GMP regulations, quality systems, and inspection readiness within QC laboratories Experience in creating and revising SOPs, work instructions, and other quality documentation Ability to coordinate QC activities and support operational readiness projects in laboratory environments Strong collaboration and communication skills, working effectively across cross functional teams Demonstrated ability to drive results, adapt quickly to changing situations, and maintain a strong business and quality focus Renowned pharmaceutical company Attractive salary package HAYS Benefits Ihr Kontakt Referenznummer 864632/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
As a Regional Planner, you will support the Project Management Office in establishing planning transparency, ensuring schedule quality, and applying consistent planning standards across our international project portfolio.
As a Regional Planner, you will support the Project Management Office in establishing planning transparency, ensuring schedule quality, and applying consistent planning standards across our international project portfolio.
Transport gametes/embryos in accordance with regulations. Participate in research projects as needed. Communication: Attend lab/clinic meetings as directed by Lab Manager. Ensure effective communication with other departments and TFP.
At the earliest possible date we are looking for...Education: Master in optoelectronic engineering, physics or relevant engineering Experience: >3 years’ experience on product development Project concept and planning capability preferredFamiliar with optical software Zemax and relative optics setupHands-on experience & theory on Zygo measurement, interferometer, optical path calibration, and lens manufacturingOptional: Software programing skill, such as matlab, C+, C# …etc., is a plus Personal skills: Good communications: People interaction and teamwork skills.
Your Contribution Global Process Owner (GPO) Define and implement global binding procurement process standardsEnsure creation and maintenance of global process related documentsEnsure alignment with interacting global processesInitialize the rollout of global process into the global/site-specific organizations and ensure documentation of the implementation statusEnsure definition of process related training requirements and initiation of process trainingsEnsure management of system related trainings and creation of training material for the Key User and Process UserInitiate and/or conduct regular process reviews to assess the implementation status of the defined processesGlobal monitoring, controlling and reporting of the process performance against defined KPIs Supplier Development Engineer Plan, create, and implement supplier development programs for efficient and sustainable supplier development to reduce supply costsDevelop strategic development plans and quality assurance processes for suppliersConduct root-cause analyses for challenges arising in various procurement processes, projects, and supplier managementTake over project leadership when needed, advise Global Category Managers and project managers, propose potential solutionsManage the resulting change processes: monitor, advise, and train suppliers regarding compliance with agreements and contracts, monitor adherence to delivery commitmentsDesign and lead global special projects and procurement projects, involving the required internal and external technical resourcesPlan the projects, define project objectives, and track progress using appropriate project management methodsEnsure implementation in alignment with technical and commercial project requirementsMonitor suppliers classified as critical (technical and commercial) and derive risk‑mitigation measures in coordination with the respective Global Category Managers Your Profile Master’s degree in general management / economics / business administration / industrial engineering or comparable education with strong focus on economics and engineering/quality managementMin. 5 years of experience in different fields of business process management, quality management, procurement and economicsAnalytical and logical thinkingExcellent skills in communication and negotiationConflict resolution capabilities and stress resilienceLeadership and change management competenciesFluent EnglishProject management skills (IPMA Level D beneficial)Willing to travel internationally (~30%) Your Benefits SCHOTT’s openness to promote your further development is just as great as our additional benefits.
Key responsibilities include: Maintain maintenance plans for production equipmentProvide technical feedback and sharing of daily experience for existing product portfolioExecute/Implement Process & Equipment related to RRC standardsPerform Failure Analysis of Process and Equipment issues, identify Root causes and develop repair procedure including component levelProvide technical expertise and support to all topics related to released equipment and proceduresInvolvement in other projects within the scope of process engineering’s skills and capabilitiesActive application of Problem-Solving tools and methodologyFamiliar with programming languages such as C/C++, PythonAt least 2 years’ experience in manufacturing / mass production environmentProfessional experience in automation Electronics, automationPerformed maintenance and troubleshooting for production equipmentNative-language VietnameseFluent English (written and spoken) is a must]MES/SAP experience is advantageWork for a German technology company in a truly international environmentKey leadership role in a growing high-tech manufacturing siteHigh level of responsibility with strong influence on processes and standardsClose cooperation with international experts and headquartersLong-term development opportunities in a stable and innovative company
Ihr Aufgaben End-to-End Projektmanagement: Verantwortung für die Planung, Steuerung und erfolgreiche Umsetzung komplexer Kundenprojekte im Bereich der Antriebstechnik.Interdisziplinäre Leitung: Führung von Projektteams nach APQP-Standards (Advanced Product Quality Planning) sowie Definition technischer Arbeitspakete.Reporting & Controlling: Erstellung von Terminplänen (MS Project), Durchführung von Risikobewertungen (FMEA) und regelmäßiges Reporting an die Geschäftsführung.Schnittstellenmanagement: Enge Zusammenarbeit mit der Konstruktion (CAD/PLM), dem Vertrieb und der Fertigung zur Sicherstellung der Cost-, Quality- and Delivery-Ziele (CQD).Prozessoptimierung: Aktive Mitwirkung bei der Weiterentwicklung von Standards im Projektmanagement am Standort in der Region Eisenbach.
Do you like to work independently in a multidisciplinary team on innovative projects? Then we are looking for you! As Hardware Engineer you are responsible for independently designing and creating electrical diagrams according to specifications.
Project Coordinator (m/f/d) Automotive Industry About redi-Group We are a global technical service provider specialized in quality activities across the whole supply chain and production facilities.
Maschinenbau, Fahrzeugtechnik, Elektrotechnik) oder vergleichbare QualifikationMindestens 3 Jahre Berufserfahrung im Qualitätswesen der Automobilindustrie, idealerweise mit direkter Lieferanten- und SerienbetreuungFundierte Kenntnisse in gängigen Qualitätsmethoden und Tools wie APQP, PPAP, FMEA, MSA, SPC, 8D, VDA 6.3Sehr gute Kenntnisse in MS Office, insbesondere Excel; Erfahrung mit MS Project von VorteilAnalytisches Denken, eigenverantwortliches Handeln und sicheres Auftreten in cross-funktionalen TeamsReisebereitschaft im Rahmen von Audits und AnläufenSehr gute Deutsch- und Englischkenntnisse in Wort und Schrift Wir bieten: KarrierechancenIndividuelles angepasstes SchulungsprogrammFaires, vertrauensvolles ArbeitsklimaRegelmäßige Networking EventsVorteile bei unseren Partnern in den Bereichen Fitness, Gesundheit, Versicherung, Shopping und LifestyleBetriebliche Altersvorsorge Anforderungen an Mitarbeiter sind vielfältig.
Maschinenbau, Fahrzeugtechnik, Elektrotechnik) oder vergleichbare Qualifikation Mindestens 3 Jahre Berufserfahrung im Qualitätswesen der Automobilindustrie, idealerweise mit direkter Lieferanten- und Serienbetreuung Fundierte Kenntnisse in gängigen Qualitätsmethoden und Tools wie APQP, PPAP, FMEA, MSA, SPC, 8D, VDA 6.3 Sehr gute Kenntnisse in MS Office, insbesondere Excel; Erfahrung mit MS Project von Vorteil Analytisches Denken, eigenverantwortliches Handeln und sicheres Auftreten in cross-funktionalen Teams Reisebereitschaft im Rahmen von Audits und Anläufen Sehr gute Deutsch- und Englischkenntnisse in Wort und Schrift Wir bieten: Karrierechancen Individuelles angepasstes Schulungsprogramm Faires, vertrauensvolles Arbeitsklima Regelmäßige Networking Events Vorteile bei unseren Partnern in den Bereichen Fitness, Gesundheit, Versicherung, Shopping und Lifestyle Betriebliche Altersvorsorge Anforderungen an Mitarbeiter sind vielfältig.
Talent development; Free Parking; Further training and education; Medical, Dental and Vision coverage; Multiple career opportunities; Team Events; paid vacation days, holidays and sick time Please feel free to contact us You can expect interesting tasks and challenging projects, as well as motivated and friendly teams in fields that influence our future. Do you want to be successful with us? Then, please send us your application: SCHOTT Glass (Malaysia) Sdn.
Roles & Responsibilities Responsible for budget, time and quality within own area of responsibility Active collaboration with involved SubPMs, Project Leads and project engineers, support exchange of information, strengthen collaboration Drive requirement engineering in own area of responsibility Actively promoting the model-based engineering process for C&P design Development of C&P design concepts in own area of responsibility Acts as a driver for the implementation of Best Practices and Lessons Learned in the project Responsible, Accountable and Contributing as defined in the RACI matrix for projects and offers Tracking of issues and deviations as well as initiating mitigations from tender until acceptance in own area of responsibility Works in projects and offers Analysis of the Customer specification with focus on the technical requirements on the C&P Hardware in view of the variations from our standard, the feasibility and the necessary tests.
Operates machine for customers’ factory acceptance test Tests customers’ materials and product for packaging; provide feedback to engineers and project management; suggest improvements to resolve technical issues Troubleshoots electrical and mechanical problems and notifies required personnel, makes necessary approved modifications and corrections during start-up and checkout and documents changes.
Operates machine for customers’ factory acceptance test Tests customers’ materials and product for packaging; provide feedback to engineers and project management; suggest improvements to resolve technical issues Troubleshoots electrical and mechanical problems and notifies required personnel, makes necessary approved modifications and corrections during start-up and checkout and documents changes.
Please send your written application to Martin Alsted directly. RAU | CONSULTANTS is not in charge of this search project.
Ruhr: Strategic, analytical mindset with strong data quality focus Independent, ownership driven working style Clear and structured documentation skills Mentoring and knowledge sharing mindset At least six years' experience in implementation projects, of which at least two years must have been spent in thematically comparable IT projects, Special knowledge in several technical areas, PM: At least two years' experience in IT project management with full management responsibility for the project staff, Management of Cat.
Stellenbeschreibung Für unseren namhaften Auftraggeber in Augsburg suchen wir zum frühestmöglichen Eintrittstermin eine/n Terminplaner - Engineering Scheduler (m/w/d) Ihre Aufgaben: Erstellung und Pflege der Terminpläne für EPC-Anlagen ab Tender- bis zur Abwicklungsphase und der Engineering Document Submittal Lists Strukturierung des Engineeringprojektablaufes unter Berücksichtigung der Masterdokumentenliste/KKS-Struktur und des Kundenvertragterminplans Abstimmung der Work Breakdown Structure, Schlüsseldokumente, Verknüpfungen der einzelnen Projektschnittstellen und des jeweiligen Engineering-Status Fortschrittsmessung, Reporting, Koordination der Quality Gate Checks Terminliche Steuerung der Dokumentenbereitstellung Ihr Profil: Erfolgreich abgeschlossenes Studium (Maschinenbau, Mechatronik, Wirtschaftsingenieurwesen oder vergleichbar) Fundierte Berufserfahrung in Terminplanung/Terminplanreporting im Anlagenbau/Engineering Berufserfahrung im Projektmanagement wünschenswert Sehr gute MS Project-Kenntnisse VBA und/oder Python wünschenswert Verhandlungssichere Englischkenntnisse Ausgeprägte Team- und Kommunikationsfähigkeit Überzeugungsfähigkeit und sicheres Auftreten Strukturierte, methodische Arbeitsweise; Analysefähigkeit Eigeninitiative, Entscheidungsfähigkeit, Ergebnisorientierung Wir bieten: Attraktive und übertarifliche Bezahlung: Einstieg mit 33,00 EUR / Std.
Our systems are designed for: Scalable industrial production Adaptability Best-in-class performance If you're interested in joining our highly motivated team on a mission to transform the space industry from single-piece manufacturing to industrial-scale production, apply now. Job description / Your role: Serve as the responsible project manager for customer programs, ensuring alignment with scope, timelines, and quality expectations Take a leading role in preparing technical and commercial proposals for customer projects Manage the planning and scheduling of projects, including allocation of resources, budgeting, and timeline control in accordance with established project management standards Assume full ownership of assigned projects, ensuring delivery on time, within budget, and to the highest quality standards Take responsibility for the risk management according to space standards Create and maintain comprehensive project documentation, including customer-facing documents and internal reports Plan, host, and manage internal and external project reviews to monitor progress and ensure stakeholder alignment Supervise and guide project team members, ensuring clear roles, responsibilities, and collaboration within the dedicated project team Join us in shaping the future of space technology, as we move from single-piece manufacturing to scalable, industrial production.
Ihre neue Herausforderung You analyze the technical documents (e.g. manufacturing standards) and the commercial terms (e.g. packing and logistic conditions) as given in the customer contract relevant for your equipment.You prepare project-related tender documents for your equipment in coordination with the engineering and technology department.You ensure that the tender documents are issued in time to potential suppliers for preparing their bids.You select the best supplier under consideration of the project requirements in close cooperation with the purchasing department and the project management.You closely track the suppliers progress, ensure that the right expediting & quality activities are conducted and initiate mitigation measures where necessary.You involve the logistic department to ensure timely shipment of your equipment to the building site.You coordinate the preparation of customer documentation for quality, delivery, erection, commissioning, and maintenance.You support the site team for erection and commissioning issues.You actively contribute to claim management for your equipment, in close coordination with purchasing department.You contribute in the project closure and lessons learned.
Project Management Business Partner (m/f/d) for AIRBUS Our offer: Attractive and fair salary conditionsExtensive employee benefit programme “Orizon PlusPoints”Training measures suiting your tasks and activitiesUp to 30 days of annual leavePersonal support and qualified advice from the Aviation Unit offices, e.g. in Hamburg-Finkenwerder, Stade, Augsburg, Munich or Bremen Your prospective job: For our client Airbus Operations, you will be working as a Project Management Business Partner (m/f/d) at the location Hamburg-Finkenwerder.
YOUR TASKS Coordinate and monitor the progress of subcontractors and report regularly to the BOP Manager and other stakeholders Ensure timely project completion by continuously tracking schedules and adjusting plans to prevent delays Enforce safety regulations and building codes through regular inspections and identification of hazards or violations Ensure all construction activities comply with approved plans, specifications, permits, and applicable standards Implement, supervise, and ensure compliance with the Quality Control Plan (QCP), including verification of completed work units and required testing Review construction procedures and resource requirements to meet design specifications and local/international standards Verify the foundation assembly process and act as a technical advisor during construction phases, applying defined quality procedures and stop points Identify and resolve issues during construction, verify subcontractor resources for correcting deviations, and review corrective procedures for compliance with QCP and regulations Maintain accurate documentation of project progress and quality control measures Communicate effectively with clients, contractors, and stakeholders to ensure project expectations are met YOUR PROFILE Degree in civil engineering or a related field; equivalent professional experience is also considered Experience in civil construction, ideally in wind energy projects and in supervisory roles Solid understanding of quality control procedures and local as well as international regulations Strong communication and leadership skills with the ability to guide and motivate teams Proven ability to resolve conflicts and conduct audits in construction environments Fluency in German and English (minimum B2–C1), both written and spoken Proficiency in project-related documentation and stakeholder interaction A valid driver’s license recognized in Germany is required for this position ADDITIONAL REQUIREMENTS The following valid certifications and safety trainings are required for this position: Working at Heights certification (issued within the last 12 months) First Aid training Fire Awareness training Confined Spaces training (due to work in the foundation pit) WILLINGNESS TO TRAVEL: You are ready to travel and work flexibly on-site according to project requirements.
YOUR TASKS Coordinate and monitor the progress of subcontractors and report regularly to the BOP Manager and other stakeholders Ensure timely project completion by continuously tracking schedules and adjusting plans to prevent delays Enforce safety regulations and building codes through regular inspections and identification of hazards or violations Ensure all construction activities comply with approved plans, specifications, permits, and applicable standards Implement, supervise, and ensure compliance with the Quality Control Plan (QCP), including verification of completed work units and required testing Review construction procedures and resource requirements to meet design specifications and local/international standards Verify the foundation assembly process and act as a technical advisor during construction phases, applying defined quality procedures and stop points Identify and resolve issues during construction, verify subcontractor resources for correcting deviations, and review corrective procedures for compliance with QCP and regulations Maintain accurate documentation of project progress and quality control measures Communicate effectively with clients, contractors, and stakeholders to ensure project expectations are met YOUR PROFILE Degree in civil engineering or a related field; equivalent professional experience is also considered Experience in civil construction, ideally in wind energy projects and in supervisory roles Solid understanding of quality control procedures and local as well as international regulations Strong communication and leadership skills with the ability to guide and motivate teams Proven ability to resolve conflicts and conduct audits in construction environments Fluency in German and English (minimum B2–C1), both written and spoken Proficiency in project-related documentation and stakeholder interaction A valid driver’s license recognized in Germany is required for this position ADDITIONAL REQUIREMENTS The following valid certifications and safety trainings are required for this position: Working at Heights certification (issued within the last 12 months) First Aid training Fire Awareness training Confined Spaces training (due to work in the foundation pit) WILLINGNESS TO TRAVEL: You are ready to travel and work flexibly on-site according to project requirements.
Support procurement processes across all Carve-out phases including due diligence, planning and executionEnsure smooth transition and integration of systems, services and suppliersDevelop and manage strong relationships with key vendors and service providersLead negotiations and manage supplier performance and complianceConduct strategic sourcing and supplier selection based on quality, cost and reliabilityManage contract creation, negotiation and lifecycle governancePerform data analysis to identify cost optimization and process improvement opportunitiesAssess, monitor and mitigate procurement-related risksCollaborate closely with cross-functional stakeholders including IT, Automation, Quality, Finance, Legal and MROMaintain procurement KPIs and develop data-driven performance reports Bachelor’s degree in IT, Business Administration, Supply Chain Management or a related fieldMaster’s degree or relevant certifications (CPSM, CIPS) are an advantageExperience in indirect procurement, ideally in CDMO or pharma environmentsExperience in Carve-out or Divestment activitiesExtensive knowledge in procurement processes, strategic sourcing, vendor and contract managementProven track record in managing procurement streams within business divestmentsStrong negotiation, analytical and problem-solving skillsExcellent communication abilities and stakeholder management skillsProficiency in procurement systems, ERP tools and MS OfficeStrategic thinker, highly organized, adaptable, resilient and collaborative in team settings Opportunity to work on high-impact strategic Carve-out projects within a global CDMOExposure to cross-functional leadership teams and strategic decision-makingInnovative, collaborative and international work environment Ihr Kontakt Referenznummer 863140/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Your Responsibilities: Analyse and improve the inbound and inventory process together with logistics service provider at an operational and tactical levelEnsure high safety standards, quality and performanceDefine, implement, and follow up on recovery and improvement measures based on in-depth performance analysis and reportingDevelop layouts, processes, equipment and tools of the Inbound and Inventory setup along logistics transformation in Hamburg (Fuhlsbüttel and Wilhelmsburg)Develop and maintain strong, collaborative relationships with the Logistics Service Providers as well as internal stakeholders across Satair and Airbus Your Profile: Completed studies in Industrial Engineering, Supply Chain / Logistics, Supply Chain Quality or comparableMany years of professional experience in Logistics, Process Planning / Improvement and DocumentationVery good knowledge in Lean and Process ManagementGood knowledge in Change Management, KAIZEN and Project ManagementKnowledge in Production Planning and problem solving methods advantageousGood skills in SAP R/3Skills in Google Workspace, Confluence and Jira are beneficialFluent English and German skills spoken and written Bewerbung und Rückfragen Wir freuen uns auf Bewerbungen (unter Angabe von ID-Nummer 4342, Verfügbarkeit und Gehaltsvorstellung) gerne per E-Mail an bewerbung.aviation@orizon.de oder über unser Bewerbungsmodul auf dieser Seite.
Your Tasks Manage an interdisciplinary project team including engineering, production, and purchasing experts Deliver a cost-of-energy optimized technical system in close collaboration with all relevant functions Oversee all project phases from feasibility study to start of production in an international environment Ensure achievement of project goals regarding cost, quality, and timeline Apply professional project controlling using KPIs, progress evaluation, and deviation management Implement risk and stakeholder management throughout the project lifecycle Develop innovative approaches to reduce time-to-market and prepare decision proposals for management Your Profile Diploma or Master’s degree in Mechanical Engineering, Industrial Engineering, or equivalent Proven experience in engineering project management; PM certification is a plus Several years in the wind industry, ideally with drive train and nacelle expertise Strong MS Office skills, including MS Project Server; ERP and PLM experience advantageous Clear, structured communication and reporting skills; high quality awareness and assertiveness Intercultural experience and willingness to travel; fluent English, Spanish or German beneficial YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
Your Tasks Manage an interdisciplinary project team including engineering, production, and purchasing experts Deliver a cost-of-energy optimized technical system in close collaboration with all relevant functions Oversee all project phases from feasibility study to start of production in an international environment Ensure achievement of project goals regarding cost, quality, and timeline Apply professional project controlling using KPIs, progress evaluation, and deviation management Implement risk and stakeholder management throughout the project lifecycle Develop innovative approaches to reduce time-to-market and prepare decision proposals for management Your Profile Diploma or Master’s degree in Mechanical Engineering, Industrial Engineering, or equivalent Proven experience in engineering project management; PM certification is a plus Several years in the wind industry, ideally with drive train and nacelle expertise Strong MS Office skills, including MS Project Server; ERP and PLM experience advantageous Clear, structured communication and reporting skills; high quality awareness and assertiveness Intercultural experience and willingness to travel; fluent English, Spanish or German beneficial YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
As well as contributing to the clinical workload, the successful candidate will have opportunities to be involved in training junior embryologists, service development, research, quality management, donor recruitment and project work. The Deputy Laboratory Manager will support the Laboratory Manager in the delivery of the service and management of the laboratory team.
As well as contributing to the clinical workload, the successful candidate will have opportunities to be involved in training junior embryologists, service development, research, quality management, donor recruitment and project work. The Deputy Laboratory Manager will support the Laboratory Manager in the delivery of the service and management of the laboratory team.
High autonomy and ownership: You are motivated, take matters into your own hands, and can lead a complex project or process with little oversight from your manager. Strong communicator: You can communicate transparently, honestly, and effectively with both technical and non-technical stakeholders (e.g.
Impact & Team Power: High degree of creative freedom and unbeatable team power in a high performance work environment Salary & Employee Discounts: Secure job with the pioneer of discounts offering an attractive salary and corporate benefits Your tasks Agile development & configuration (front & backend) of an international PIM/MDM solution Build & further enhance our PIM/MDM data models based on complex business requirements Code review & unit testing and perform quality assurance and testing (error analysis, bug fixing) Take over responsibility for our regular release cycle & deployments Strong collaboration with other technical teams Translation of technical requirements into features, epics and user stories Assuring the Third Level Support for our platform(s) Transfer of technical knowledge to our domain and business colleagues as well as mentor junior developers and support project teams Your profile Completed education in IT/computer science (e.g., IT specialist apprenticeship, specialist for application development) or a related university degree (Computer Science, Business Informatics) or equivalent qualification Proven development experience with PIM and/or MDM solutions; PIM XY experience is a plus Proficiency programming with languages like PHP or JavaScript as well as experience in API development based on REST or GraphQL Experience working in international, cross functional projects using agile methodologies (e.g., Scrum, Kanban); ability to technically lead and coach teams is a plus Structured, organized, self directed, and solution oriented working style with high quality standards Very good German & English skills (spoken and written) Confident use of MS Office applications Developer-PIM-MDM-m-f-d-MDM-Platform-Solutions-Essen
Improve process efficiency and cost through automation and IT initiatives, ranging from minor to major automation projects. Explore opportunities to leverage technology for process optimization. Your Profile Degree in Mechanical Engineering, with 3-axis or 5-axis CNC knowledge.3-5 years related working experience, with MNC.Required knowledge in Dicing, ID Saw, Laser.Experienced in Six Sigma, Lean Manufacturing, NX-Siemens CAD/CAM.Good command of English & Bahasa Malaysia.Experience in machine automation & Project Management an added advantage.
Tasks and responsibilities Support the Product Manager with periodic sales/market analysis & product presentations and monitor the competitor’s landscape Help to develop, maintain and update product information Collaborate with the product development and marketing teams to produce contents Provide ideas as well as opportunities to assist and enhance the product marketing strategy Help to create and manage seasonal projects Support in the monitoring of project timelines Profile University student or degree in management, economics, engineering or a similar field Good knowledge of the English language , Italian is a plus Analytical skills Open minded, hands-on mentality, team player Good knowledge of MS Office (Excel & Power Point) Passionate about mountain sports Workplace: Bolzano, IT If you are interested to work in a challenging, international and dynamic environment then apply now!
Job-ID: HMT-PMPO-A | Hydromet | Project Management | Aachen KISTERS is a global leader in environmental data, energy and IT solutions. With a reputation for innovation and reliability, we provide organisations around the world with advanced technology to monitor and manage environmental challenges.
Register now and look forward to many interesting and suitable positions and projects. Mein Arbeitgeber Our client is a globally recognized leader in the medical technology and diagnostics industry. The Rotkreuz site focuses on the development and testing of advanced laboratory instruments used worldwide in highly regulated environments.
As Global Project Manager (m/f/d), you will take full responsibility for leading complex, cross-functional development projects covering the entire wind turbine system, not just individual components.
Tasks and responsibilities Support the Product Manager with periodic sales/market analysis & product presentations and monitor the competitor’s landscape Help to develop, maintain and update product information Collaborate with the product development and marketing teams to produce contents Provide ideas as well as opportunities to assist and enhance the product marketing strategy Help to create and manage seasonal projects Support in the monitoring of project timelines Profile University student or degree in management, economics, engineering or a similar field Good knowledge of the English language , Italian is a plus Analytical skills Open minded, hands-on mentality, team player Good knowledge of MS Office (Excel & Power Point) Passionate about mountain sports Workplace : Bolzano, IT If you are interested to work in a challenging, international and dynamic environment then apply now!
Your responsibilities: Participate in and contribute to a high performing cross functional customer account support team and customer resolution services teamResponsible and proactive management of the customer specific open order bookBuild and maintain strong customer satisfaction through industry leading quick response times as well as qualified responses to all customer requests and inquiriesHandle quotations and customer orders pertaining to the products including timely follow up on quotations, claims and orders in accordance with KPIs Maintenance of customer recordsDrive customer satisfaction by providing high quality responses to all customer related requests for spare parts and related servicesMaintenance and development of the customer service quality levelDirectly contribute to the increase in customer satisfaction and enhance internal and external communication related to customer material order performanceSupport organisation in securing on-time material delivery to meet customer expectations Train and Support our customers in using our e-commerce platforms Participate in back-up arrangements in support of absence by other Customer Resolution SpecialistsParticipate in periodic functional and cross-functional activities (e.g. projects, meetings etc) as per agreement with the Manager Your profile: Completed studies in supply chain / logistics, buiseness administration, industrial engineering or comparableProfessional experience in procurement, customer service and logisticsExperience in the field of shipping or aviation is an advantageGood knowledge of SAP and Google WorkshopHigh proficiency in English both written and spokenGerman would be a plus Bewerbung und Rückfragen Wir freuen uns auf Bewerbungen (unter Angabe von ID-Nummer 731, Verfügbarkeit und Gehaltsvorstellung) gerne per E-Mail an bewerbung.aviation@orizon.de oder über unser Bewerbungsmodul auf dieser Seite.
Business Process Manager Supply Chain (m/f/d) for AIRBUS Our offer: Attractive and fair salary conditionsExtensive employee benefit programme “Orizon PlusPoints”Training measures suiting your tasks and activitiesUp to 30 days of annual leavePersonal support and qualified advice from the Aviation Unit offices, e.g. in Hamburg-Finkenwerder, Stade, Augsburg, Munich or Bremen Your prospective job: For our prestigious client Airbus Operations at the location Fuhlsbüttel you act as Business Process Manager Supply Chain (m/f/d). Your responsibilities: Supporting ongoing Satair Projects and Initiatives affecting the Satair Management Systems and Surveillance activities, e.g. the current Material Management Industrialisation Platform (MMIP) Actively managing the development and deployment of business processes and requirements that affect the organization Supporting activities related to the Satair Company Management System Documentation Contribute to internal reporting, including the development and maintenance of performance dashboards to provide clear visibility into results and compliance status Contribute to the continuous improvement of internal methodologies, tools, and processes Contribute to the deployment and maintenance of the Company Management System across all global sites, ensuring consistent application and adherence Process Documentation and Collaboration Contribute to the development and formal documentation of business processes within key company repositories, such as the AIRBUS Business Management System (BMS) and the SATAIR Company Management System (CMS) Support relevant Project initiatives for ASOQP, primarily the Material Management Industrialisation Platform MMIP Your profile: Completed studies in Business Administration, Supply Chain Quality or comparableWork experience in the field of Supply Chain / Logistics, Quality Management and Process ImprovementKnowledge in SAP, Google Workspace and PythonBasic knowledge in Change Management, Project Management and Process ManagementFluent English skills, written and spokenGerman skills are desirable Bewerbung und Rückfragen Wir freuen uns auf Bewerbungen (unter Angabe von ID-Nummer 2855, Verfügbarkeit und Gehaltsvorstellung) gerne per E-Mail an bewerbung.aviation@orizon.de oder über unser Bewerbungsmodul auf dieser Seite.
Your responsibilities: Performing detailed analysis and analytical thinking to support the design and integration of galley and stowage systems Developing and managing cabin customization requirements, ensuring seamless integration of galleys and stowage solutions into various aircraft configurations Contributing to the design integration process, collaborating with cross-functional teams within the design office and manufacturing & assembly departments Conducting data analytics to optimize system performance, identify potential issues, and support decision-making processes Leading and participating in project management activities related to galley and stowage monument development, including planning, execution, and monitoring Ensuring the qualification and certification of all galley and stowage monuments, adhering to stringent aerospace standards and regulations Implementing and maintaining robust quality management processes throughout the design and manufacturing phases Engaging in effective communication with internal stakeholders, suppliers, and regulatory bodies Your profile: Completed studies in Electrical Engineering, Aircraft Manufacturing, Aerospace, Mechanical Engineering, Mechatronics or comparableWork experiecne in Industrial Design, Interior Design, Supplier Management, Aerospace and Project ManagementKnowledge in Catia V5, CCD, Taksy/Gesy/Tesy, vpm and Google WorkspaceExperience in Total Quality Management, in the field of civil aviation (CA) documentation and Product Lifecycle Knowledge of procedures and processes involved in aircraft modification (FCO) and the procedures and processes involved in cabin integration and module development would be a plus Airbus experience desirableFluent English and German skills, both written and spoken Bewerbung und Rückfragen Wir freuen uns auf Bewerbungen (unter Angabe von ID-Nummer 3141, Verfügbarkeit und Gehaltsvorstellung) gerne per E-Mail an bewerbung.aviation@orizon.de oder über unser Bewerbungsmodul auf dieser Seite.
As Global Project Manager (m/f/d) , you will take full responsibility for leading complex, cross-functional development projects covering the entire wind turbine system , not just individual components.
Register now and look forward to many interesting and suitable positions and projects. Mein Arbeitgeber Our client is a globally recognized leader in the medical technology and diagnostics industry. The Rotkreuz site focuses on the development and testing of advanced laboratory instruments used worldwide in highly regulated environments.
Support procurement processes across all Carve-out phases including due diligence, planning and execution Ensure smooth transition and integration of systems, services and suppliers Develop and manage strong relationships with key vendors and service providers Lead negotiations and manage supplier performance and compliance Conduct strategic sourcing and supplier selection based on quality, cost and reliability Manage contract creation, negotiation and lifecycle governance Perform data analysis to identify cost optimization and process improvement opportunities Assess, monitor and mitigate procurement-related risks Collaborate closely with cross-functional stakeholders including IT, Automation, Quality, Finance, Legal and MRO Maintain procurement KPIs and develop data-driven performance reports Bachelor’s degree in IT, Business Administration, Supply Chain Management or a related field Master’s degree or relevant certifications (CPSM, CIPS) are an advantage Experience in indirect procurement, ideally in CDMO or pharma environments Experience in Carve-out or Divestment activities Extensive knowledge in procurement processes, strategic sourcing, vendor and contract management Proven track record in managing procurement streams within business divestments Strong negotiation, analytical and problem-solving skills Excellent communication abilities and stakeholder management skills Proficiency in procurement systems, ERP tools and MS Office Strategic thinker, highly organized, adaptable, resilient and collaborative in team settings Opportunity to work on high-impact strategic Carve-out projects within a global CDMO Exposure to cross-functional leadership teams and strategic decision-making Innovative, collaborative and international work environment Ihr Kontakt Referenznummer 863140/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Job-ID: HMT-PMPO-A | Hydromet | Project Management | Aachen KISTERS is a global leader in environmental data, energy and IT solutions. With a reputation for innovation and reliability, we provide organisations around the world with advanced technology to monitor and manage environmental challenges.
Your Contribution Act as the primary technical point of contact for customers and Sales regarding OEM products, applications, and development needs.Serve as technical expert for assigned product groups; ensure specifications, requirements, and use conditions are fully understood and documented.Lead technical negotiations with customers, engaging as a peer and ensuring both technical and commercial alignment.Own product specifications for assigned OEM and standardized components.Evaluate feasibility of OEM inquiries; clarify technical questions with Technical Centers, Supply Chain Management, Product Management, Engineering, and Purchasing.Propose technical solutions and provide cost estimations in support of quotations and commercial opportunities.Lead or participate in customer-driven or strategic internal projects; coordinate prototype production, engineering samples, and technical evaluations.Drive internal and external approvals for changes in specifications, materials, supplier processes, or production methods.Perform competitive analysis and technology benchmarking to support product positioning and improvement.Provide technical documentation, application notes, and training materials; ensure all materials are accurate and up-to-date.Train Sales teams and, as needed, customers on new products, applications, and technologies.Support the Quality Department in resolving internal and customer complaints, including guiding root cause analysis and corrective actions.Contribute technical insights to global/regional product strategy, roadmap planning, and annual R&D activities.Establish and maintain product files (including medical product files when applicable).Ensure compliance with all Environmental, Health & Safety requirements.Perform additional duties as assigned to support SBF Medical's goals.
As an Injection Moulding Engineer, you'll bring your expertise to strengthen our project teams and play an active role in design for manufacturing of our plastic components. Key responsibilities Your main responsibilities will include: Acting as an individual contributor in projects related to injection moulding design, leading the implementation and documentation of new processes from 3D model to final component.